Konig Electronic HAV-MCS42 Bedienungsanleitung Seite 12

CD mode
1. One track repeat
Select the track to be repeated and begin
playback. Press the ST-MO/CD-MODE button
once. The RPT indicator blinks in the display and
the selected track will be repeated continuously.
2. One folder repeat
Select the folder to be repeated and begin
playback. Press the ST-MO/CD-MODE button
twice. The RPT FOLDER indicator blinks in the
display and the selected folder will be repeated
continuously.
3. All track repeat
During playback, press the ST-MO/CD-MODE
button three times. The RPT indicator shows in
the display and all the tracks on the disc will be
repeated continuously.
4. Random playback
The random playback feature allows you to play
all the tracks on a disc in random order. Playback
stops when all tracks are played once. You can
select random playback while in stop mode or
while listening to the disc. Press the ST-MO/
CD-MODE button three times to start random playback mode, the RND indicator
appears in the display. If necessary, press the BAND/ button to begin playback.
The player will randomly select a track to start playback from.
To cancel random playback, press the  STOP button or press the ST-MO/CD-
MODE button. The RND indicator disappears and normal playback will resume from
that point.
Programmed Playback
The CD player enables you to program a total of 20
tracks in any order. Any track can be programmed
as many times as you like. Load a compact disc into
CD compartment.
1. Press the PROG button while in stop mode.
PROGRAM and P01 F-00 appears in the display.
2. Press / or / repeatedly to select
the desired folder.
3. Press the PROG button to confirm the folder of
the first track.
4. Press / or / repeatedly to select
the desired track number.
5. Press the PROG button to confirm the track
number for the first position in the program. P02
appears in the display and the device will be
waiting for your next input.
6. In order to store the remaining program repeat
above steps 3 and 5 until the memory is full.
7. When you have completed programming, press
BAND/ to start playback of the programmed
track list. PROGRAM appears in the display.
12