Werbung
All manuals and user guides at all-guides.com
Quick Start Guide
Installation
NetModule Wireless Routers are designed for mounting on a panel using through holes or a DIN rail mounting kit or to be
put on a worktop. Please consider the safety instructions in section 2.
NetModule Wireless Routers will only operate reliably over the cellular network if there is a good signal. For many applica-
tions a flexible stub antenna will be suitable but in some circumstances it may be necessary to use a remote antenna with
an extension cable to allow the antenna itself to be positioned to provide the best possible signal reception. NetModule
can supply a range of suitable antennas.
Step 1 - Installing the SIM card
Insert at least a SIM card into the first SIM socket. Make sure the SIM is suitable for data transmission.
Step 2 - Connecting the GSM/UMTS/LTE antenna
Fit a cellular antenna. Contact NetModule for suitable antennas.
Step 3 - Connecting the GPS antenna (if applicable)
Connect the GPS antenna cable to the GPS antenna connector.
Step 4 - Connecting the WLAN antenna (if applicable)
Connect the WLAN antenna cable to the WLAN antenna socket 'WLAN 1'. In case you require improved reception (' Receive
Diversity'), connect a second WLAN antenna to the socket 'WLAN 2'.
Step 5 - Connecting the LAN cable
Connect one NetModule Wireless Router Ethernet port to your computer using a patch cable.
Step 6 - Connecting the power supply
Connect the smaller end of power supply adapter to the NetModule Wireless Router power socket. Connect the other end
of the power supply adapter to a standard electrical outlet.
sales@netmodule.com
www.netmodule.com
Werbung
