Herunterladen Diese Seite drucken

hepco & becker 8106520 00 12 Montageanleitung

Motorschutzplatte

Werbung

Motorschutzplatte/ Skid plate
BMW F 850 GS Adventure
2019-
6520
810
00 12
alu
BMW F 750 GS
2018-
6512
810
00 12
INHALT
CONTENT
1x 700010224 Motorschutzplatte
1x 700010225 Halter hinten
1x 700010227 Halter vorne
1x 700010228 Schraubensatz:
4x Zylinderschraube ISK M6x16
2x Zylinderschraube ISK M6x35
2x Zylinderschraube ISK M8x45
2x Zylinderschraube ISK M6x50
1x Zylinderschraube ISK M8x16
6x Linsenschraube M8x20
4x Selbstsichernde Mutter M6
10x U-Scheibe Ø8,4
4x Karosseriescheibe Ø6,4xØ18
2x AludistanzØ15xØ9x30
2x AludistanzØ18xØ9x25
2x AludistanzØ13xØ7x16
2x Schutzstreifen
1x Logo H&B
BMW F 850 GS
2018-
810
alu
6513
00 12
alu
1x 700010224 Skid plate
1x 700010225 Adapter rear
1x 700010227 Adapter front
1x 700010228 Screw kit:
4x allen screw M6x16
2x allen screw M6x35
2x allen screw M8x45
2x allen screw M6x50
1x allen screw M8x16
6x filister head screw M8x20
4x self lock nut M6
10x washer Ø8,4
4x body washer Ø6,4xØ18
2x alu spacer Ø15xØ9x30
2x alu spacer Ø18xØ9x25
2x alu spacer Ø13xØ7x16
2x plastic protective strips
1x emblem H&B
1

Werbung

loading

Inhaltszusammenfassung für hepco & becker 8106520 00 12

  • Seite 1 Motorschutzplatte/ Skid plate BMW F 850 GS Adventure BMW F 850 GS 2019- 2018- 6520 6513 00 12 00 12 BMW F 750 GS 2018- 6512 00 12 INHALT CONTENT 1x 700010224 Motorschutzplatte 1x 700010224 Skid plate 1x 700010225 Halter hinten 1x 700010225 Adapter rear 1x 700010227 Halter vorne 1x 700010227 Adapter front...
  • Seite 2 From the outside put self lock nuts M6 into the recesses in the protection strip. Inside use allen screws M6x16. Den Kunststoff-Motorschutz und dessen beiden Halterungen demontieren, alle Teile entfallen. Remove the plastic skid plate and its two brackets, all parts are obsolete. 8106520 00 12...
  • Seite 3 Ø6,4x18. Place the alu spacers Ø15xØ9x30 between the holder and the threaded holes. Rear screw connection points: Use allen screws M8x45 and washer Ø8,4. Fahrtrichtung/driving direction Between the holder and the threaded holes set the alu spacers Ø18xØ9x25. 8106520 00 12...
  • Seite 4 Weiteres Zubehör auf unsere Homepage. More accessories: see our homepage. Hepco & Becker GmbH Tel.: +49 (0)6331 - 1453 - 100 An der Steinmauer 6 Fax: +49 (0)6331 - 1453 - 120 D-66955 Pirmasens eMail: vertrieb@hepco-becker.de Germany www.hepco-becker.de 8106520 00 12...

Diese Anleitung auch für:

8106513 00 128106512 00 12