Cleaning And Care - Peaq PMO C 240-VFH Bedienungsanleitung

Set picture characteristic
1. With the monitor turned on, press the up
button until the desired characteristic has been
set. You can choose from:
Standard mode
Movie
FPS (FPS (First-person shooter)
Gaming mode)
RTS (RTS (Real-Time Strategy)
Gaming mode)
Eye filter (Low blue light mode)

Cleaning and Care

• Always unplug the power supply from the power
outlet before cleaning.
Troubleshooting
If there are any problems during operation, please refer to the following table. If problems cannot be
solved as indicated under Solution, please contact your manufacturer.
Problem
Product does not
work
Dim image
Black stripes right
and left
Wrong or abnormal
colors
Valid from March 1st 2021:
Use the link https://eprel.ec.europa.eu/ to access the European product database (EPREL), in
which more information about the product is saved. Type in the EPREL- registration number
356983, or simply scan the QR-code on the energy label to access the model information.
IM_PMO C240-VFH_201020_V05_HR.indb 17 IM_PMO C240-VFH_201020_V05_HR.indb 17
Possible causes
• No signal
• Interrupted power supply
• Brightness and contrast too low
• Aspect ratio setting 16:9 or 4:3
• Loose or broken pins in the cable
connector
• Caution! Water must not enter the device.
• Clean the housing with a slightly damp cloth.
Clean the display with special screen cleaning
cloths. Always check the instructions of the
cleaning agent. Certain agents might not be
suitable for cleaning this product.
• Do not use any sharp, abrasive or aggressive
cleaning agents.
• Do not use any chemicals (e.g. gas, alcohol) to
clean the housing.
Disposal
Do not dispose of this appliance as unsorted
municipal waste. Return it to a designated
collection point for the recycling of WEEE.
By doing so, you will help to conserve resources
and protect the environment. Contact your retailer
or local authorities for more information.
Solution
• Check the power indicator at the back,
if the light is on, check the signal input; if
the light is off, check the power supply
• Adjust the brightness and contrast
• Check the display settings of your
Computer
• Check the D-Sub or HDMI cable to
make sure it is in good condition and
securely connected
ENGLISH
17
20/10/2020 1:41 PM 20/10/2020 1:41 PM