Controls And Components; Accessories - Peaq PMO C 240-VFH Bedienungsanleitung

Before first time use
Remove the product and accessories carefully
from the original packaging. It is recommended
to keep the original packaging for storage. If you
wish to dispose of the original packaging, please
observe applicable legal provisions. Should you
have any questions regarding proper disposal,
contact your local waste management center.
Inspect the delivery contents for completeness
and damages. Should the delivery contents be
incomplete or damaged, contact your sales outlet
immediately.

Controls and components

A. Screen
B. Control panel with on/off switch
C. HDMI input
D. VGA input
E. DC jack
F. Stand

Accessories

1 x Monitor
1 x HDMI cable
1 x Power adaptor
1 x Stand
1 x User manual
1 x Warranty card
Installing the stand
Mount the base and stand neck. Now mount the
stand neck to the appropriate place on the back
of the monitor.
IM_PMO C240-VFH_201020_V05_HR.indb 13 IM_PMO C240-VFH_201020_V05_HR.indb 13
Connections
POWER SUPPLY
Insert the DC plug of the power adapter into the
DC jack on the back of the monitor.
HDMI or VGA connection
Connect the appropriate connectors on the back
of the monitor to your computer or other suitable
player using appropriate cables.
Note: If you would like to connect an external device
with this product, a good quality shielded cable
must be used, which ensures the electromagnetic
compatibility of the product and the used cable as
a whole.
Operation
TURNING THE UNIT ON/OFF
To turn the monitor on and off, press the on/off
switch .
Note:
• In Off mode, the monitor will switch on
automatically,when the connected PC/notebook
is started.
• If you didn't press any key within 4 hours, the
Monitor will power off automatically. You can
reset the power off time individually from OFF /
0-24 hrs under the menu setting Reset.
• Display time: A count-down time of 60 seconds
will be started before turn off. On the display it
will shows: XX (60-0) second to power off, please
push any key to cancel.
General settings
MENU SETTINGS
For navigation in the menu, refer to the table
Controls menu and for the main menu, all sub-
menus and items the table Operation Menu
(OSD) - Function Descriptions.
ENGLISH
13
20/10/2020 1:41 PM 20/10/2020 1:41 PM