Littium Ibiza DOGMA 03 Benutzerhandbuch Und Garantie Seite 50

C. Turning the screen light off and on
Pressing the UP button will turn the screen on. Pressing the DOWN button for 3 seconds will turn the
light on.
Pressing the DOWN button for 3 seconds will turn the light off.
D. Selection of PAS level
When the screen is on, you can click on the UP button to adjust the PAS level designed to change the
motor output power. The PAS level is normally set to level 0 and can be adjusted from 0 to 5.
E. Battery indicator
If the battery is fully charged, five bars will be displayed as illustrated in the figure. These bars will
gradually disappear as the battery runs down. When the battery is almost flat, the last bar will flash
and the battery will need to be charged.
F. Definition of the error code
When the e-bike's drive system fails, it will stop working and the screen will automatically display the
error code. The error will remain on the screen until the problem has been dealt with.
Use of the bicycle
Once the control panel has been connected, the 100% charged battery and the checked bike can used
as normal.
We recommend using position 4 or 5 for steep climbs.
The brakes are equipped with a device that cuts off the power to the motor, thereby preventing
accidents.
50