SUNFEEL DO4331-ID Installations- Und Bedienungsanleitung Seite 4

- For induction hobs, after use, switch off the hob
element by its control and do not rely on the pan
detector.
- For hobs incorporating a lid, any spillage should be
removed from the lid before opening. And also the hob
surface should be allowed to cool before closing the lid.
- The appliance is not intended to be operated by means
of an external timer or separate remote-control system.
- Do not use harsh abrasive cleaners or sharp metal
scrapers to clean the oven door glass and other surface
since they can scratch the surface, which may result in
shattering of the glass or damage to the surface.
- Do not use steam cleaners for cleaning the appliance.
- Your appliance is produced in accordance with all applicable local and international standards and
regulations.
- Maintenance and repair work must be made only by authorized service technicians. Installation and
repair work that is carried out by unauthorized technicians may endanger you. It is dangerous to alter or
modify the specifications of the appliance in any way.
- Prior to installation, ensure that the local distribution conditions (nature of the gas and gas pressure or
electricity voltage and frequency) and the requirements of the appliance are compatible. The requirements
for this appliance are stated on the label.
- CAUTION: This appliance is designed only for cooking food and is intended for indoor domestic
household use only and should not be used for any other purpose or in any other application, such as for
non-domestic use or in a commercial environment or room heating.
- All possible security measures have been taken to ensure your safety. Since the glass may break, you
should be careful while cleaning to avoid scratching. Avoid hitting or knocking on the glass with
accessories.
- Ensure that the supply cord is not wedged during the installation. If the supply cord is damaged, it must
be replaced by the manufacturer, its service agent or similarly qualified persons in order to prevent a
hazard.
Installation Warnings
- Do not operate the appliance before it is fully installed.
- The appliance must be installed by an authorized technician and put into use. The producer is not
responsible for any damage that might be caused by defective placement and installation by unauthorized
people.
- When you unpack the appliance, make sure that it is not damaged during transportation. In case of any
defect; do not use the appliance and contact a qualified service agent immediately. As the materials used
for packaging (nylon, staplers, styrofoam...etc) may cause harmful effects to children, they should be
collected and removed immediately.
- Protect your appliance against atmospheric effects. Do not expose it to effects such as sun, rain, snow
etc.
- The surrounding materials of the appliance (cabinet) must be able to withstand a temperature of min
100°C.
2