Inhaltsverzeichnis
Werbung
Verfügbare Sprachen
Verfügbare Sprachen
An estimation of the level of exposure to vibration should also take into account the times when the tool is
switched off or when it is running but not actually doing the job.This may significantly reduce the exposure
level over the total working period.
Maintain the tool and the accessories,keep hands warm,organise work patterns.
APPLICATION
This tool is intended for impact drilling in concrete, brick and stone as well as for light chiseling work; for
drilling in wood, metal and plastic as well as for screwdriving specific accessories should be used.
are devoted to continuously improving and perfecting the existing products. Therefore,
the technical performance and design concept of products may vary without any prior notice; our apology
for any possible incurrence of inconvenience therefrom. Read and follow the operating instructions and
safety information before using for the first time. Save this manual.
WARNING
Remove the plug from the socket before carrying out any adjustment, servicing or maintenance. Read all
safety warnings and all instructions. Failure to follow the warnings and instructions may result in electric
shock, fire and/or serious injury. Make sure the voltage corresponds to the type label on the unit. Packing
materials are no toys! Children must not play with plastic bags! Danger of suffocation! The power tool noise
output may exceed 85dB(A) at the workplace. In this instance, wear ear protection.
GENERAL SAFETY
Read all safety warnings and all instructions. Failure to follow the warnings and instructions may result in
electric shock, fire and/or serious injury.
Save all warnings and instructions for future reference.
The term "power tool" in the warnings refers to your mains-operated (corded) power tool or battery-
operated (cordless) power tool.
1) Work area safety
a) Keep work area clean and well lit. Cluttered or dark areas invite accidents.
b) Do not operate power tools in explosive atmospheres, such as in the presence of flammable liquids,
gases or dust. Power tools create sparks which may ignite the dust or fumes.
c) Keep children and bystanders away while operating a power tool. Distractions can cause you to lose
control.
2) Electrical safety
a) Power tool plugs must match the outlet. Never modify the plug in any way. Do not use any adapter
plugs with earthed (grounded) power tools. Unmodified plugs and matching outlets will reduce risk of
electric shock.
b) Avoid body contact with earthed or grounded surfaces, such as pipes, radiators, ranges and
refrigerators. There is an increased risk of electric shock if your body is earthed or grounded.
c) Do not expose power tools to rain or wet conditions. Water entering a power tool will increase the risk
of electric shock.
d) Do not abuse the cord. Never use the cord for carrying, pulling or unplugging the power tool. Keep
cord away from heat, oil, sharp edges and moving parts. Damaged or entangled cords increase the risk of
electric shock.
e) When operating a power tool outdoors, use an extension cord suitable for outdoor use. Use of a cord
suitable for outdoor use reduces the risk of electric shock.
f) If operating a power tool in a damp location is unavoidable, use a residual current device (RCD)
protected supply. Use of an RCD reduces the risk of electric shock.
3) Personal safety
a) Stay alert, watch what you are doing and use common sense when operating a power tool. Do not use
a power tool while you are tired or under the influence of drugs, alcohol or medication. A moment of
inattention while operating power tools may result in serious personal injury.
2
GB
b) Use personal protective equipment. Always wear eye protection. Protective equipment such as dust
mask, non-skid safety shoes, hard hat, or hearing protection used for appropriate conditions will reduce
personal injuries.
c) Prevent unintentional starting. Ensure the switch is in the off-position before connecting to power
source and/or battery pack, picking up or carrying the tool. Carrying power tools with your finger on the
switch or energising power tools that have the switch on invites accidents.
d) Remove any adjusting key or wrench before turning the power tool on. A wrench or a key left attached
to a rotating part of the power tool may result in personal injury. e) Do not overreach. Keep proper footing
and balance at all times. This enables better control of the power tool in unexpected situations.
f) Dress properly. Do not wear loose clothing or jewellery. Keep your hair, clothing and gloves away from
moving parts.
Loose clothes, jewellery or long hair can be caught in moving parts.
g) If devices are provided for the connection of dust extraction and collection facilities, ensure these are
connected and properly used. Use of dust collection can reduce dust-related hazards.
4) Power tool use and care
a) Do not force the power tool. Use the correct power tool for your application. The correct power tool
will do the job better and safer at the rate for which it was designed.
b) Do not use the power tool if the switch does not turn it on and off. Any power tool that cannot
be controlled with the switch is dangerous and must be repaired. c) Disconnect the plug from the
power source and/or the battery pack from the power tool before making any adjustments, changing
accessories, or storing power tools. Such preventive safety measures reduce the risk of starting the power
tool accidentally.
d) Store idle power tools out of the reach of children and do not allow persons unfamiliar with the power
tool or these instructions to operate the power tool. Power tools are dangerous in the hands of untrained
users.
e) Maintain power tools. Check for misalignment or binding of moving parts, breakage of parts and any
other condition that may affect the power tool's operation. If damaged, have the power tool repaired
before use. Many accidents are caused by poorly maintained power tools.
f) Keep cutting tools sharp and clean. Properly maintained cutting tools with sharp cutting edges are less
likely to bind and are easier to control.
g) Use the power tool, accessories and tool bits etc. in accordance with these instructions, taking into
account the working conditions and the work to be performed.
Use of the power tool for operations different from those intended could result in a hazardous situation.
5) Service
a) Have your power tool serviced by a qualified repair person using only identical replacement parts. This
will ensure that the safety of the power tool is maintained.
SAFETY INSTRUCTION FOR ROTARY HAMMER
•Wear ear protectors with rotary hammer (exposure to noise can cause hearing loss)
•Use auxiliary handles supplied with the tool (loss of control can cause personal injury)
•Avoid damage that can be caused by screws, nails and other elements in your work piece; remove
thembefore you start working
•Always keep the cord away from moving parts of the tool
•Secure the work piece (a work piece clamped with clamping devices or in a vice is held more securelythan
by hand)
•When you put away the tool, switch off the motor and ensure that all moving parts have come to
acomplete standstill
•Use completely unrolled and safe extension cords with a capacity of 16 Amps (U.K. 13 Amps)
•In case of electrical or mechanical malfunction, immediately switch off the tool and disconnect the plug
•Maxpro can assure flawless functioning of the tool only when the correct accessories are used which
canbe obtained from your MAXPRO dealer
•Use only accessories with an allowable speed matching at least the highest no-load speed of the tool
•This tool should not be used by people under the age of 16 years
•If the drill bit becomes unexpectedly jammed (causing a sudden, dangerous reaction), immediatelyswitch
GB
3
Werbung
Inhaltsverzeichnis
