Basic Operation - 1 BY ONE Ring Collar Music Wireless Headset Bedienungsanleitung

Basic operation

Volume control
Press the Volume "+" or "-" to turn volume up or down, and you
will hear beep once reaching the maximum or minimum volume.
LED status indicator
Instruction LED status
Power on Stays blue for about 1.5 seconds
Power off Stays red for about 1.5 seconds
Standby Blink blue twice every 5 seconds
Pairing Flashes Red and Blue alternately
Incoming call Blink blue once every 3 seconds
Battery low Flashes red twice every 8 seconds
Charging Stays on red while charging,
Stays on blue after fully charged
All manuals and user guides at all-guides.com
Voice prompts
Power on
Power off
/
Pairing
Cell phone rings
Battery low
/
3
Pairing
Pair one phone
1. Press and hold the Power button for about 3 seconds until LED
flashes blue and red alternately, you hear "Power on" and
"Pairing", now earphone is in pairing mode.
2. Activate Bluetooth on your phone and set it to search for new
devices.
3. Select "1byone BS006". If your phone asks, enter 0000 (four
zeros) for the passcode or accept the connection. The LED
indicator stops flashing red and blue once successfully paired,
you hear "Connection successful".Some phone list an option to
"Play through earphone", select to use the earphones.
Bluetooth
Search
Bluetooth
ON
1byone BS006
Connect
4