Moving And Carrying Notice; Installation - Legamaster STX-Serie Benutzerhandbuch

2.2. MOVING AND CARRYING
NOTICE
Moving the display:
Moving the display requires at least four people.
Attempting to move the display with one person may
result in dropping the display and/or serious injury.
When moving a display in its shipping carton, lift the
carton using the white handles.
Carrying the display:
This display is heavy; please follow proper lifting
techniques, as pictured below. Failure to do so may
cause injury.
SAFETY INSTRUCTIONS

2.3. INSTALLATION

Don't install in a high-temperature
environment.
If the display is used in high-temperature or in
direct sunlight, it may cause the case or other
parts to become distorted or damaged, resulting
in overheating or electrical shock.
Don't install in a high-humidity
environment.
This may cause overheating or electrical shock.
Don't install near any heat sources such as
radiators, heat registers, stoves, or other
apparatus that produce heat.
This may cause fire or electrical shock.
Don't overload outlets or cables beyond
electrical capacity.
Don't use extension cords as it may cause fire or
electrical shock.
Don't insert the power plug into an outlet
other than 100~240V AC.
This may cause fire or electrical shock.
• Don't use a damaged power plug or worn
outlet.
• Don't insert an improper power plug it may
cause fire or electric shock.
Don't place the display on an unstable shelf
or surface.
The display may fall, causing injury. Please install
on a horizontal, stable, level surface.
Don't place objects on the display.
• If the display is covered or the vents are
blocked, the display could overheat and
cause a fire.
• If metal or liquid gets into the display, it may
cause fire or electrical shock.
• Do not put heavy objects on the display as
they may fall, causing injury.
• Please keep a 10 cm minimum distance
between the display and the wall for
sufficient ventilation.
STX-SERIES – USER MANUAL – ENGLISH
5