Klarfit 10035492 Bedienungsanleitung Seite 52

EN
Adjusting ring
Locking ring
Knob
52
How to adjust the handbrakes
Slide the
cable into
the slot
If you look at the trailer from behind: Lay the cable on the right side
1 under the trailer, between the frame and the fabric. Secure the cable
with the Velcro fasteners located under the trailer frame.
Slide the brake cable into the slot (1) in the handbrake fi rst. Align
the slots on the adjusting ring and the locking ring with the slot in
2
the brake lever and guide the brake cable to the left (2). Turn the
adjusting ring to hold the brake cable in place (3).
Open the handlebar clamp of the brake lever by removing the knob.
3
Wrap the clamp around the handlebars and tighten the knob.
If the tension of the cable needs to be adjusted Loosen the locking
ring and turn the adjustment ring to loosen or tighten the cable.
4 Secure the adjustment ring in the new position by tightening the
locking ring. If the adjustment is not suffi cient, contact your local
bicycle dealer.
CAUTION
Danger of injury! To avoid serious injury, ensure that the
cable and brake are securely fastened before each journey
and do not obstruct any moving parts of the unit!