Herunterladen Inhalt Inhalt Diese Seite drucken

Transport; Storage; Disposal; Technical Data - AL-KO solo 126 L Betriebsanleitung

Inhaltsverzeichnis

Werbung

Verfügbare Sprachen
  • DE

Verfügbare Sprachen

  • DEUTSCH, seite 1

Transport

10 TRANSPORT
Transporting the appliance between two
working areas
1. Switch off the engine.
2. Put the transport protection onto the blade.
3. Hold the brushcutter firmly at the engine
block and the handle.
4. Walk carefully to the next working area. Take
care not to endanger persons or animals.
Transporting the appliance in a vehicle
1. If possible: Empty the fuel tank by allowing
the engine to run.
2. Switch off the engine.
3. Put the transport protection onto the blade.
4. Ensure that the appliance cannot tip over
while driving to prevent the petrol/oil mixture
from running out:
Place the appliance on the floor of the
vehicle so that the fuel tank cap is facing
upwards. The fuel tank must be securely
closed.
Fix the appliance to the floor of the vehi-
cle.

11 STORAGE

If the appliance is not going to be used for more
than 2 – 3 months, the following work is neces-
sary to avoid any damage:
1. Empty the fuel tank:
Allow the engine to run until it stops itself.
Then there is no longer any petrol/oil mix-
ture in the fuel tank or carburettor and
deposits cannot form.
2. Cleaning the appliance:
Wipe the entire appliance and accessory
parts with a cleaning rag. Do not use pet-
rol or other solvents.

13 TECHNICAL DATA

Article number
Dry weight
Engine type
442959_a
126 B
126 L
127610
127611
5.2 kg
4.9 kg
Air-cooled
Air-cooled
2-stroke en-
2-stroke en-
gine, 1 cyl-
gine, 1 cyl-
inder
inder
Remove any dirt from all appliance open-
ings (including cooling openings for the
engine).
3. Oiling the cylinder:
Allow the appliance to cool down com-
pletely.
Pull off the spark plug connector and un-
screw the spark plug (see chapter 8.3
"Servicing the spark plug 17)", page 36)
Drop a little oil into the spark plug open-
ing.
Slowly pull on the starter handle so the
piston moves and the oil is distributed in
the cylinder.
Screw in the spark plug again tightly and
push on the spark plug connector.
4. Put the transport protection onto the blade.
5. Store the device in a cool, dry place.
CAUTION! Risk of injury. If the appliance
is accessible to children and unauthorised per-
sons during storage, this can result in injury.
Store the appliance out of the reach of chil-
dren and unauthorised persons.

12 DISPOSAL

Petrol and motor oil do not belong in
household waste or the public sewer
system, but should be collected and
disposed of separately.
Before disposing of the device you must
empty the fuel tank and the engine oil tank!
Packaging, equipment and accessories are
made from recyclable materials, and must be
disposed of accordingly.
130 B
130 L
127612
127613
6.0 kg
5.5 kg
Air-cooled
Air-cooled
2-stroke en-
2-stroke en-
gine, 1 cyl-
gine, 1 cyl-
inder
inder
140 B
140 L
127614
127615
7.7 kg
7.2 kg
Air-cooled
Air-cooled
2-stroke en-
2-stroke en-
gine, 1 cyl-
gine, 1 cyl-
inder
inder
151 B
127616
8.5 kg
Air-cooled
2-stroke en-
gine, 1 cyl-
inder
39

Quicklinks ausblenden:

Werbung

Inhaltsverzeichnis
loading

Inhaltsverzeichnis