For E.s.e.® Pods - Zanussi CKZ39-BL Gebrauchsanweisung

5. Selecting your coffee volume
Place a cup on the removable grid. As soon as the
lights on the control buttons stop flashing, press the
small cup or large cup button to start making coffee.
To stop the coffee flow, press the selected cup
button again.
For E.S.E.® pods
1. Preparation
Lift the lever and remove any adapter from the
appliance.
2. Inserting the pod into the adapter
Insert the stainless steel filter holder into the adapter
then place the E.S.E. in the filter holder. Close the
adapter
www.zanussismallappliances.fr www.zanussismallappliances.be www.zanussismallappliances.nl
6. End of procedure
Lift the lever and remove the adapter. Lower the
lever to close.
Wait until the adapter has cooled down before
opening its cover discarding the used capsule. If
you are no longer using the device, please wash the
adapter with hot soapy water for future use.
3. Inserting adapter into the machine
Lift the lever and insert the adapter into its
compartment. Lower the lever to close it.
4. Switching on the appliance & preheating
Press the ON/OFF button to turn on the
appliance. The 3 control buttons light up and
cover. flash to indicate that the appliance is in
preheating
approximately 45 seconds.
mode. The warm-up time is
37