Tempo Communications OPM510 Bedienungsanleitung Seite 6

Important Safety Information
The SLS520, SLS530, SLLS535 and SLS5336 instruments are a laser
device conforming to the requirements of CDRH, CFR 1040. While there
is no potential for eye damage due to unaided direct exposure, users
should always avoid looking directly into the output port. The use of
optical viewing instruments, such as microscopes, magnifiers, etc.,
should always be avoided. The use of such devices around active fibers
can focus an intense beam of light energy onto the retina of the eye,
which can result in permanent damage.
Laser hazard:
• When performing measurements on fiber optic systems, avoid eye
exposure to any open-ended fibers, optical connectors, optical
interfaces, or other sources because they may be connected to
active laser transmitters.
• Do not look into the optical port when a source is turned on.
• Avoid looking at the free end of a test fiber, i.e., the end not con-
nected to the instrument. If possible, direct the free end toward a
non-reflective surface.
Failure to observe these precautions may result in injury.
6