Maintenance - Bell & Ross BR03-92 Technische Anweisung

STRAP MOUNTING
Attachments (F) with screws on the outer face of the lugs
The 4 socket head screws (hexagon socket/1.3 mm
diameter) mount the strap to the case attach-
ments. These screws must be handled carefully,
using the 2 tools supplied with the watch in its
box.
Attachments (F) with no visible screws
A spring bar is used to fit the strap to the case
5
attachments. This bar must be removed carefully
using the appropriate tool provided with the watch
in the box.
IMPORTANT
As with all mechanical watches with a date func-
*Quickset date setting.
tion, quickset date setting (crown in position 1) MUST NOT UNDER ANY CIR-
CUMSTANCES be carried out between the times of 9 P .M. (21:00) and 3 A.M.
(03:00).
Magnetic fields. Magnetic fields can adversely affect the accuracy of your
watch. Also, we would recommend that you avoid placing your watch near
electronic devices that may generate large magnetic fields (radio, smart-
phone, television, computer, tablet, loudspeakers etc.).
Water resistance. Once the watch is set, to ensure perfect water resistance,
push the crown back to position 0. Never operate the crown underwater.
Note: The 4 slotted screws (D) mount the bezel to the case and ensure the
water resistance of the watch. To benefit from the Bell & Ross warranty, these
screws must never be unscrewed.

MAINTENANCE

After being immersed in seawater, it is recommended to carefully rinse off the
watch and strap with fresh water. It is also recommended to have the water
resistance of your watch checked every two years. To ensure a service that
meets the brand's exacting standards, any servicing of your watch must be
carried out by the Bell & Ross service centre or a watchmaker approved by
Bell & Ross. Whenever repairs are made during the warranty period, you must
present the Bell & Ross warranty card, duly dated and signed by the retailer
at the time the watch was purchased.
ENGLISH