Pairing Mode - Urbanista LONDON Bedienungsanleitung

L O N D O N M A N U A L

1. PAIRING MODE

FI RST TI M E PAI RI N G
To connect the earphones to a Bluetooth device for the first
time - open the charging case whilst the earbuds remain inside
the case. The earphones will automatically enter pairing mode.
Open Bluetooth settings on your device and select "Urbanista
London". You can now enjoy your music and make phone calls
using your Urbanista London.
If pairing is not established within 5 minutes, pairing mode is
cancelled and the procedure must start over.
2 . EARBUDS
PLAY - Tap the logo (1) on the Left (L) earbud twice.
PAUSE - Tap the logo (1) on the Left (L) earbud twice.
VOLUME (+) - Tap the logo (1) on the Right (R) earbud.
VOLUME (–) - Tap the logo (1) on the Left (L) earbud.
ANSWER INCOMING CALL - Touch the logo (1) on
the Left (L) or the Right (R) earbud twice.
END A CALL - Touch the logo (1) on the Left (L) or
the Right (R) earbud twice.
REJECT A CALL- Touch and hold either the logo (1)
on the Left (L) or the Right (R) earbud.
SIRI - Touch the logo (1) on the Right (R) earbud twice.
ACTIVE NOISE CANCELLING ON/OFF - Touch and
hold the logo (1) on the Right (R) earbud for 2 seconds.
AMBIENT VOICE MODE ON/OFF - Touch and hold
the logo (1) on the Left (L) earbud for 2 seconds.
4
( E N G )