Glossary Of Terms; Machine Transport And Handling; Handle With Care - CIBIN ALASKA Serie Bedienungsanleitung

1.0.7 GLOSSARY OF TERMS

- Compressor. An organ of the refrigerating system that is able to intake the refrigerant in its gas state and compress it as it is
released at a higher pressure.
- Condenser and Evaporator. Heat exchangers where the "exchange of heat" occurs between the refrigerant and the
surounding air.
- Grid. A protective element for mechanical moving parts, which also consents the passage of air.
- Fan. A mechanical organ which moves air through the heat exchangers.
- Refrigerating Circuit. A body composed of parts that contain refrigerant and which are joined together to form a closed
refrigerating circuit in which the refrigerant circulates to absorb or release heat.
- Defrosting. A process in which the ice formed between the evaporator fins is melted by raising the temperature by hot gas
of the compressor or by electric heating resistors or by air.
- Control Panel. An electronic device for the control of all machine functions.
- Cold Room. A room insulated against heat for the storage and conservation of perishable goods at a temperature that is
different to that of the ambient temperature level.

1.1 MACHINE TRANSPORT AND HANDLING

The machines are protected during transport by particularly sturdy packing which is resistant to various stresses.
In spite of its low dimensions the packaged machine cannot be transported manually.
The correct lifting system to use is a fork lift or pallet conveyor/mover, making sure that the weight of the machine is evenly
distributed. For highest safety during transport and handling, the equipment contained inside the packing has been screwed
down to the pallet.
The packing has printed warning symbols that represent the instructions to follow during transport and storage in order to assure
that no damage is caused to the equipment during loading and unloading operations
The symbols printed on our packing are as follows (UNI ISO 780):

HANDLE WITH CARE

Stacking limits for the goods with regard to transport and storage are as follows:
Type
A, B, C
D, H
E, F
WARNING!! The values shown in the table are valid for packaged goods that have been properly placed one on top of the
other. Because the centre of gravity of the equipment is not the same as its geometrical centre, take care when tilting the package
during handling operations.
THIS WAY UP PROTECT FROM
Transport
3
3
3
68
FORK
HERE
FORK HERE
MOISTURE
Warehouse
4
5
4