Initial Configuration Via The Web Browser - Novus NVIP-4H-6522M/F Benutzerhandbuch

NVIP-4H-6522M/F - User's manual (short form) ver 1.1
START-UP AND INITIAL CAMERA CONFIGURATION
•
Connection using external power supply directly to the computer
IP Camera
Computer
Network transmission - cross over cable
Information:
Power supply adapter is not included. Please use power adapter with parameters specified in user 's
manual.

2.5. Initial configuration via the web browser

The default network settings for NVIP-4H-6522M/F camera are :
1. IP address= 192.168.1.200
2. Network mask - 255.255.255.0
3. Gateway - 192.168.1.1
4. User name - root
5. Password - pass
Knowing the camera's IP address you need to appropriately set PC IP address, so the two devices can
operate in one network subnet ( e.g. for IP 192.168.1.200, appropriate address for the camera ranges
from 192.168.1.2 to 192.168.1.254, for example 192.168.1.60). It is not allowed to set the same
addresses for camera and PC computer
You can either set a network configuration (IP address, gateway, net mask, etc.) of NOVUS IP camera
yourself or select DHCP mode (DHCP server is required in this method in target network) by using
web browser or by NMS software. When you use DHCP server check IP address lease and its linking
with camera MAC address to avoid changing or losing IP address during device operation or network/
DHCP server breakdown. You have to remember to use a new camera IP address after changing
network parameters.
After network setting configuration has been done, the camera can be connected to a target network.
All rights reserved © AAT SYSTEMY BEZPIECZEŃSTWA Sp. z o.o.
12