Suaoki 86002 Betriebsanleitung Seite 3

Thank you for choosing Suaoki. Please read this user manual carefully
before use and keep it for future reference.
This high precision gauge is used for measuring tire pressure, deflating
and inflating tires. It features 4 tire pressure unit (0 ~ 150 PSI, 0 ~ 10 Bar,
0 ~ 10 Kg/cm², 0 ~ 1000 kpa), clip-on design for single-hand operation and
heavy duty aluminum alloy barrel with anti-slip cover.
Operating Instruction
● How to check tire pressure
1. Unscrew the cap of car tire valve.
2. Squeeze the lock-on air chuck and then directly plug it into car tire valve.
3. Check tire pressure with the trigger released. Press the unit button to
select the appropriate measuring unit, then it will show you the current
tire pressure.
● How to deflate a tire
Press the built-in relief valve and then air down your tire to the desired
pressure.
● How to inflate a tire
1. Connect the lock-on chuck to your car tire valve.
2. Connect the quick connnector coupler of this gauge to a compressor.
3. After that, pull the trigger of the inflation gun and hold it. In this stage, if
you want to check tire pressure, you MUST release the trigger to get an
accurate reading.
4. Please remove the air chuck and screw the cap back to the car tire
valve after use.
※ Note:
Air compressor is NOT included.
· 1 ·
EN