D E S C R I P T I O N
For the precise positioning of the engine during fi tting and removal.
Makes it easier to attach the engine to the gearbox by balancing out the centre of gravity.
•
Load-bearing capacity 350 kg
•
Inner dimension 490 mm
•
Adjustment dimension +/- 210 mm
•
Two chains à 500 mm
•
Crank 160 mm
S A F E T Y I N S T R U C T I O N S
•
Make sure to not exceed the recommended capacity of 350 kg when lifting a load.
•
Only use chains, hooks and other accessories that are suitable for lifting heavy loads.
•
Check the leveler before each use. Do not use it when it shows any signs of wear like cracks,
distortion or any kind of damage.
•
Only attach this leveler to a hoist that is equipped with a safety loop hook.
A P P L I C AT I O N
•
Hang the leveler into the hook of the
hoist. Attention: The hook has to come
with a safety loop.
•
Hang the chains into the leveler
(as shown in the picture).
•
Attach the load you want to lift to both
chains by using appropriate
accessories.
•
Lift the load and spin the crank to
level it.
4
20315L_manual_75050_de_en_es_roh.indd 4
20315L_manual_75050_de_en_es_roh.indd 4
05.11.20 10:38
05.11.20 10:38