Inhaltsverzeichnis
Werbung
Verfügbare Sprachen
Verfügbare Sprachen
TECHNICAL DATA
Model
Voltage
Frequency
Power
Protection Class
OPERATION
CONTROL PANEL
Press the power switch on the back to "I" position, you can
hear "Bi", and the heater is in standby mode.
ON / OFF FUNCTION
Press the button "
" to turn on the unit, the indicator lights up in red, LED display
will show room temperature and appliance start at HIGH mode. Press it again to
turn off the unit. The fan inside will power off 30s later in HIGH / LOW mode.
MODE
In working mode, press the button "
as HIGH - FAN - LOW - HIGH, the corresponding indicator lights up, red - blue -
green - red, in turn.
PH-1903-15
220-240 V~
50 / 60 Hz
1500 W
II
LED displayer
Mode
Temperature
ON / OFF button
" to choose the working modes which cycles
TEMPERATURE SETTING
Press the button "
" to choose the setting temperature you want during working
mode, which can be set in the order of 15 °C - 35 °C, increased at 1 °C intervals.
(default temperature is 24 °C).
Note (HIGH / LOW mode):
1.
The temperature SET should be higher than the room temperature, otherwise,
the appliance will not start heating.
2.
Once the room temperature achieves the target temperature, the appliance
will stop automatically, the fan inside will power off 30s later.
3.
If the room temperature is 1°C less than temperature SET, the appliance will
restart.
TIMER FUNCTION
1.
In working mode, press the button "
automatic off of the product. The LED display will switch to timer setting, the
figures flash on screen, as below:
2.
To deactivate timer function press the button "
3.
The appliance can be set between 1 to 8 hours, increased at 1 hour intervals.
4.
To adjust the timer press "
" or "
the setting to be memorized.
Note: Figures will keep flashing on the screen until the program setting is
finished.
5.
After setting finished, screen will automatically show "Temperature" - "Timer" –
"Temperature" in turns within 5 second each.
Note: Timer on screen will decrease at 0.1 hour intervals, eg: 2.8 hours.
5.
When the programmed time is reached, the heater stop working, the fan
inside will power off 30s later.
TIP - OFF SAFETY DEVICE
This appliance is provided with a safety device which will switch off the heater in
48 | 49
" and "
" at the same time to set
" and "
" at the same time.
" buttons then wait a few seconds for
GB
Werbung
Inhaltsverzeichnis
