Vivotek FE9182-H Schnellinstallationsanleitung Seite 6

Ceiling or Wall Mount
1. Attach the supplied alignment sticker for the camera base to the a ceiling or wall.
2. Using the circles on the sticker, drill pilot holes into the ceiling. Then hammer the supplied plastic
anchors into the holes.
3. (Optional) Drill a cable hole on the ceiling/wall, and feed the cables through the hole.
4. Secure the camera base to the ceiling/wall with the supplied screws.
1
2
3
NOTE:
You may also install the camera to a U.S. standard 4 in. junction box.
You can align the camera's curved slots with the mounting holes on
a junction box. Use diagonal mounting positions on the camera to
match those on a junction box.
EN - 5
4