Herunterladen Inhalt Inhalt Diese Seite drucken

Operation - Polar U Serie Bedienungsanleitung

Edelstahl-kühl-/ tiefkühltische
Vorschau ausblenden Andere Handbücher für U Serie:
Inhaltsverzeichnis

Werbung

Verfügbare Sprachen
  • DE

Verfügbare Sprachen

  • DEUTSCH, seite 26
2. Slot the two side panels into the collars, with
the holes in the glass at the top.
Note: Ensure the screw hole
furthest from the edge of the
panel goes to the back of the
appliance.
3. Screw a grub screw into each collar to secure
the panels.
Note: Ensure the soft end of the
grub screw is the end making
contact with the glass.
Do not over-tighten the grub
screw as it will result in the
glass breaking.
4. Slot the rear panel into the collars, with the
holes in the glass at the top.
5. Screw a grub screw into each collar to secure
the panel.
6. Slot the plastic plugs into each of the holes.
7. Screw the brackets to the inside of each panel
using the bolt assemblies.
Note: Ensure the short end
of the bolt assembly is on the
outside of the panels.
8. Place the top panel onto the brackets, ensuring
all holes line up.
9. Insert the plugs and attach the top panel to
the brackets with the bolt assembly.
Bracket
Glass Panel
Bolt Assembly
Plug
G377-G379_G596-G600_GD873-GD874_DL914-DL917_GL182-GL184_ML_A5_v6_20201126.indb 5
G377-G379_G596-G600_GD873-GD874_DL914-DL917_GL182-GL184_ML_A5_v6_20201126.indb 5
Bolt Assembly

Operation

Storing Food
To get the best results from your POLAR appliance,
follow these instructions:
Only store foodstuffs in the appliance when it
has reached the correct operating temperature.
Do not place uncovered hot food or liquid
inside the appliance.
Wrap or cover food where possible.
Do not obstruct the fans inside the appliance.
Avoid opening the doors for prolonged periods
of time.
Turn On
1. Ensure the power switch is set to [O] and turn
on at the socket.
2. Switch on the Power [I]. The current
temperature within the appliance is displayed.
Control Panel
Set the Operating Temperature
1. Hold the SET button for 3 seconds. The value
of the current set point will be displayed.
2. Press the
or
buttons to display the
required temperature.
3. Press the SET button to store the temperature.
Manual Defrost
The appliance will automatically run a defrost
cycle every six hours.
To manually defrost the appliance: Press
and hold the defrost button "aux" for 2
seconds to begin a manual defrost. The defrost
light illuminates.
UK
5
2020/11/26 14:06
2020/11/26 14:06

Werbung

Inhaltsverzeichnis
loading

Inhaltsverzeichnis