Herunterladen Inhalt Inhalt Diese Seite drucken

Filter Replacement; Warranty; Symbol Legend - I-VALO XENRE60 Betriebs- Und Wartungsanleitung

Industrieleuchten
Inhaltsverzeichnis

Werbung

Verfügbare Sprachen
  • DE

Verfügbare Sprachen

  • DEUTSCH, seite 29
CLEANING
Before cleaning, voltage must be disconnected from the luminaire. The electronic
components and connectors must not be exposed to moisture.
The exterior surfaces of the luminaire should be cleaned of dirt occasionally, thus ensuring
its effective operation. Regular cleaning is important for optimal luminous emittance and for
obtaining the stated service life.
A thick layer of dust on top of the luminaire will increase its internal temperature. This may
reduce the service life of the luminaire.
If necessary, the luminaire can be cleaned with neutral soap solutions (pH 7), for example
dishwashing liquids. They are also suitable for cleaning the glass or the polycarbonate cover.
Dilute the cleaning agent with water, and use a cloth rag or a sponge for cleaning.
Do not spray the cleaning agent directly onto the surface of the luminaire, as it may be
difficult to remove from the protective cover.
Do not use a pressure washer to clean the luminaire.

FILTER REPLACEMENT

In a normal industrial environment, the recommended replacement interval of the filter
is around 4 to 5 years. Depending on the conditions, if dirt accumulates on the cover glass,
the filter should also be replaced while cleaning the cover glass.

WARRANTY

The luminaire includes electronics that must not be exposed to electrostatic discharges (ESD)
or dirt, and must therefore NOT be disassembled
The warranty becomes null and void, if these instructions have not been followed.

SYMBOL LEGEND

The product is covered by the Waste Electrical and Electronic Equipment Directive
2012/19/EU (WEEE), and must be properly recycled at the end of its service life.
The product is covered by the RoHS Directive 2011/65/EU on the restriction of the use of
hazardous substances in electrical and electronic equipment.
CE marking. The manufacturer declares that the product meets the requirements of
the relevant EU directives
I-VALO OY
|
TEL +358 (0) 10 501 3000
|
INFO@I-VALO.COM
|
WWW.I-VALO.COM
EN
21

Werbung

Inhaltsverzeichnis
loading

Diese Anleitung auch für:

Xenre70

Inhaltsverzeichnis