Operation - NOXE LUMENS Installations- Und Benutzerhandbuch

oPERATIoN

START
As soon as the detector is correctly installed the button will
blink REd, first every 10 seconds, then every 5 to 6 minutes.
TEST
You should test your smoke alarm every week and after a
long absence. Push for 1 second on the TEST button. The
button should blink and the smoke alarm should beep
briefly. Release the tESt button and the smoke alarm will
be in "hush" mode for 9 minutes.
HuSH MoDE
Your smoke alarm has a "Hush" function. In case of a duly
verified false alarm, you can stop the alarm sound by
pushing 1 second on the TEST button. The detector will be
less sensitive for 9 minutes and the TEST button will blink
every 10 seconds to show it is in "hush" mode.
Important
!
If the smoke alarm is in "hush" mode and the smoke
density increases (for example in case a fire starts), the
alarm will sound again.
EN | 6
30 cm