Prozis BRUME Handbuch Seite 12

EN
Warning: Do not pour water into the spray hole
directly, as it will damage the device.
3. Connect to power supply
• Connect the USB charging cable to any USB power
source.
• When connected, the device will flash a yellow light
once. The diffuser will switch on and enter standby
mode.
4. Spray function and light adjustment
Once the diffuser is on and the yellow light flashes once,
you can control the spray function by short pressing the
power button. To control the light function, long press the
power button.
a) Spray function
• Pressing the power button for the first time will activate
the continuous spray mode.
• Pressing the power button for the second time will
activate the intermittent spray mode.
• Pressing the power button for the third time will switch
off the diffuser.
• The above sequence will be repeated whenever the
power button is pressed.
12