Fritz! 1200 Schnellstartanleitung Seite 8

Connecting the FRITZ!Repeater to the
Wireless Router Using the Wizard
If your wireless router does not support setup at the touch of a button (WPS),
use the wizard to connect the FRITZ!Repeater with the wireless router.
1
Establishing a Connection to the Computer
1. Plug the FRITZ!Repeater into an outlet near your wireless router. The
FRITZ!Repeater starts operation.
2. Wait until the LED starts slowly flashing green.
3. Select the Wi-Fi network of your FRITZ!Repeater on the computer, and start
the connection process.
4. Enter the network key of the FRITZ!Repeater. The preconfigured unique
network key is printed on the back of this guide and on the back of the
device housing.
The computer establishes a connection to the FRITZ!Repeater.
8