Technical Data - hanseatic EKS 1800-35 Gebrauchsanweisung

Electric Chainsaw
Introduction to the Operating Instructions
These Operating Instructions are intended to facilitate your becoming acquainted with the machine and using it in
accordance with the regulations. The Operating Instructions contain important information on how to use the machine
safely, correctly and economically. Observing this information will help increase the reliability and working life of the
machine. The Operating Instructions must always be at hand when the machine is being used.
They must be read and observed by every person dealing with the machine, whether operating, servicing or trans‑
porting it.
In addition to the Operating Instructions and the applicable rules of the prevention of accidents valid in the country
of use and on site, the generally recognised rules on working safely and correctly must be observed as well as the
accident prevention rules of the relevant professional associations.

Technical Data

This chain saw has been built in accordance with Regulation DIN EN 50144-2-13 and fulfils the requirements of the
European law on equipment safety.
Model
Rated Voltage
Nominal Frequency
Fuse (time lag)
Rated Output
Guide Bar
Chain
Speed
Weight
Oil
All models with automatic chain lubrication and mechanical chain brake and rundown brake.
Class of Protection:
Interference Suppression:
Information on noise emission in accordance with the 3rd Decree on the German law on equipment safety of
18.1.1991 and the EU Guideline on machines, Appendix I, Section 1.7.4 f.
Noise emission values EN-50144: Sound Pressure Level L
Vibration values in accordance with EN 50144:
Attention: This chain saw is only intended for cutting wood !!!
Important instructions for your personal safety
A) General safety instructions
Attention: You run danger of injuring yourself if
you use the chain saw incorrectly. It is imperative
that you read these Operating Instructions and
follow the instructions given.
Attention: Noise protection ! Please observe the local
regulations when operating your device.
1. Caution! : When electric tools are being used, the
following basic safety measures must be taken to
protect against electric shock, injury and risk of fire.
2. Protect yourself against electric shock. Avoid body
contact with grounded elements, e.g. pipes, radia‑
tors, stoves, refrigerators.
3. Children and young persons under 18 may not
All manuals and user guides at all-guides.com
EKS 1800-35
V~ 230
Hz 50
A 16
W 1800
mm 350
91 P 052X
m/sec
ca. 13
kg 4,2
ml 140
II/ DIN‑EN 50144/ VDE 0740
according to EN 55014
100 dB (A)
pA
11,18 m/s
operate electrical chain saws, with the exception of
apprentices older than 16 under the supervision of a
trained adult.
4. The chain saw may only be used by persons who
have sufficient experience.
5. Always keep these Operating Instructions together
with the chain saw.
6. Only lend or give this chain saw to persons who are
familiar with its use. Also give them these Operating
Instructions.
7. You should always be in a good physical state when
working with the chain saw. Work steadily and with
concentration. Particular concentration is necessary
towards the end of your duty.
8. Never use the chain saw while under the influence of
alcohol, medication or drugs.
GB-1
ENGLISH
2