Function Buttons - Wilfa VANILLA 2.5 Anleitung

VANILLA 2.5 · ICM1S-250

FUNCTION BUTTONS

EN
"POWER": After connection to the power supply, the machine enters standby
mode. Then press the "POWER" button to enter the setting mode, and the LCD
screen will display "60:00". If no further operation is chosen, the light will turn off
after 15 seconds. Simply press the "POWER" button again; the machine will go
back to standby mode.
"MENU": By pressing this button, there are 3 optional working modes: "ICE
CREAM" "COOLING ONLY" and "MIXING ONLY"; the icon "n" of the selected
mode will flash. Hold this button for 3 seconds during mode operation, and the
machine will go back the menu selection.
Time setting knob: Turn the knob to set the working time, the default working
time for "ICE CREAM" "COOLING ONLY" and "MIXING ONLY" is 60 min, 60
min, 10 min, respectively. Rotating the knob towards "-" will decrease the work-
ing time, the minimum time setting is 5 min. Contrarily, rotating towards "+" will
increase time, the maximum time setting is 60 min.
"START/PAUSE": After setting the menu and time, press this button to start the
working mode. During operation, by pressing this button, the mixing will pause,
and the time countdown will pause. When in pause mode, simply press this
button again and the machine will continue the previous unfinished operation.
Once the ice cream maker enters pause mode and no other operation is chosen,
the compressor will stop working after 3 minutes and the machine will go back to
standby state after 10 minutes.
9