Using Your Telefunken Tx1** Phone On A Broadband Adsl Line; Getting To Know Your Phone; Handset - Telefunken TX 100 Bedienungsanleitung

Plug the mains power cable into the charger base, plug the other end into the mains power wall
socket and switch the power on.
To fit the NiMH battery pack into the handset, slide out the battery compartment cover. Place the
supplied rechargeable battery pack in the battery compartment, with the battery connector plugged
in, as shown above. Slide the battery compartment cover back
Place the handset on the base to charge for at least 24 hours. When the handset is fully charged
the <Fully charged battery icon> will be displayed.

Using your TELEFUNKEN TX1** phone on a Broadband ADSL line

If this product is to be used on a broadband ADSL line, then you must ensure that it is connected
via an ADSL filter. Using this product on a Broadband line without an ADSL filter may cause
problems with this product and your Broadband service.

2. GETTING TO KNOW YOUR PHONE

A. Handset
TX Bluetooth 51