Concept KV0800 Bedienungsanleitung Seite 8

EN
3. Place the Velcro on the front or inside of the sash where the window handle is attached.
4. Attach side A first, then side B. Start in the middle and continue to the sides.
5. Be careful not to get the seal between the window frame and the sash when closing the window.
6. Open the zip at the point marked "S" and fasten the exhaust hose.
Note: The length of the hose ranges from 28 cm to 150 cm. If the hose is extended beyond this length, it may malfunction
and the warranty may be voided. The outlet must be well open and must not be blocked, as this would cause the appliance
to overheat. Avoid bending the exhaust hose by more than 30 degrees, see figures below.
14
BEDIENUNGSANLEITUNG
1. Markieren Sie die Mitte (M) der Fensterdichtung (Abb. 1).
2. Markieren Sie die Mitte zwischen dem Fensterrahmen und dem Fensterflügel (Abb. 2).
KV0800 / KV1000 KV0800 / KV1000
Abb. 1
Abb. 2
DE
15