Remaining Risks - Zipper Maschinen ZI-FKS315 Betriebsanleitung

13.3

Remaining risks

It is
In the execution of all work (even the simplest) greatest attention is
required. A safe working depends on you!
Even if the machine is used as required it is still impossible to eliminate certain residual risk factors
totally. The following hazards may arise in connection with the machine´s construction and design:
 Risk of injury to the hands / fingers by the rotating saw blade during operation.
 Risk of injury due to sharp edges of the workpiece, especially in non-fixed with a
suitable tool / device workpiece
 Risk of injury: hair and loose clothing, etc. can be captured and wound up! Safety
regulations must be observed with regard to clothing.
 Risk of injury due to contacting with live electrical components.
 Risk of injury due to dust emissions, treated with harmful agents workpieces
 Risk of injury to the eye by flying debris, even with safety goggles.
 Risk of injury due to kickback:
Kickback is a sudden reaction to a jamming, grinding or staggered blade. This causes
the ejection of the workpiece to the direction of the operator.
These risk factors can be minimized through obeying all security and operation instructions, proper
machine maintenance, proficient and appropriate operation by persons with technical knowledge
and experience.
A first aid kit in accordance with should always be readily available for a possible
accident. Initiate the violation in accordance with the necessary first aid measures.
1. Place of accident
3. Number of injured people
ZIPPER MASCHINEN GmbH
ZI-FKS315
important to ensure
When requesting support, provide the following details:
www.Zipper-Maschinen.at
W A R N I N G
that each machine
N O T I C E
Emergency procedure
2. Type of accident
4. Injury type(s)
SAFETY
has remaining risks.
35