Haas 5141 Bedienungsanleitung Seite 2

Rollfix connector (GB)
1. Push the Roll x with the bead facing
upwards until it touches the spigot end.
3. fold over the protruding part with both
hands to the beginning of the stop edge.
5. The desired rolling function comes into
e ect by pressing in the spigot end. This
is achieved when the ring bead is inserted
under the Roll x.
# 5141 - 5146
2. Apply a thin, even coat of lubricant to
the upper half of the Roll x connector.
4. Insert the resulting front end into the
socket until the bead rests on the edge
of the socket.