Werbung
Verfügbare Sprachen
Verfügbare Sprachen
Bottom Menu Brief
Add Camera
View Camera
Delete Camera
Speaker Volume
Brightness
Camera
Alarm
Settings
1. Monitor Settings
Press Menu Button, Left and Right Buttons, and then OK Button to set the
monitor:
1)
Time setting: Set the current time by setting hour, minute, and AM/ PM.
2)
System sound volume: Select between Low, High, and Mute.
3)
Temperature scale: Select between °C and °F.
4)
Screen auto-sleep time: Select between 1min, 2min, 5min, and OFF.
5)
Restore to factory settings: Press OK Button to confirm resetting;
"Restoring factory settings" will be shown when restoring, and you can't
press any button to control the device during this period. The monitor will
auto restart when it's done.
6)
Customer service contacts: Check the email, Tel. number, and address
for customer service.
09
Max. 4 cameras
Select to view each at a time
Select to delete cameras
0-7 levels (mute when it's 0)
1-8 levels
To add / view / delete cameras
OFF / 2Hr / 4Hr /6Hr / Set Time
(hour / minute / AM, PM)
Time
System sound volume
Temperature scale
Auto-sleep time
Restore to factory setting
Customer service contacts
· To mute the sound during poor monitor-camera connection, please
set the
system sound volume to mute.
· When the monitor screen is under sleep mode, the power indicator
flashes green slowly while the audio is still on; press any button to
awake. You can also short press the Power Button to turn the screen
off.
· Press and hold the Power Button to power on / off the monitor.
2. Add / View / Delete a Camera
1) Press Menu button, select through
2) Select through
->
to view a camera.
3) Select through
->
to delete a camera.
You can switch viewing different cameras; the current camera
number will be shown with the Camera icon
You can only select one camera to view at one time.
3. Digital Zoom & Circulating
Press Zoom Button to zoom in to 2X / 4X when viewing the camera. A third
pressing of the button will restore to the original image.
Press and hold OK Button 4 seconds to start auto circulating, press OK
again to stop.
The current zoom level number will be shown with the Zoom icon
on the monitor
2
->
->
to add a camera.
on the monitor.
10
Quicklinks ausblenden:
Werbung
Kapitel
Fehlerbehebung
