Samsung SBR-100DCM Benutzerhandbuch Seite 3

3
Install the safety wire to the anchor bolt (2) in the
following sequence.
1. Apply a nut to the anchor bolt.
2. Fix the safety bracket into the anchor bolt.
3. Apply two nuts to the anchor bolt.
4. Hook and insert a safety wire into the safety bracket.
Safety wire
4
Hook and insert the other end of the safety wire into the
CEILING MOUNT BRACKET.
5
Insert the cable of the camera power, video output,
communication and others through the holes on the
side of the bracket.
3
All manuals and user guides at all-guides.com
6
Put the bracket through the hole into the ceiling.
Hook and insert the CEILING MOUNT BRACKET to anchor
7
bolt (1).
Turn four screws clockwise for bracket fixing included in
8
the CEILING MOUNT BRACKET to fix the bracket to the
ceiling board.
9 Make sure to apply two nuts to the anchor bolt (1).
Turn clockwise
Nut
Nut
4