Replacing Front Panel; Removing Front Panel; Installing Front Panel - Siemens iQ500 Serie Reparaturhinweise

Repair

4.2 Replacing front panel

Prerequisite:
Appliance is disconnected from power supply.
Appliance is disconnected from water supply.
Detergent drawer has been removed.
Fascia panel has been removed.
Door has been removed.
Door seal has been removed.
Base cover has been removed.→ Page 62

4.2.1 Removing front panel

Caution
Sharp housing edges!
Cut injuries
▶ Wear protective gloves.
1.
Caution
Risk of falling parts due to released screws!
Injury because of falling parts.
▶
Secure component from falling down.
Notice
Risk of falling parts due to released screws!
Damage to other parts of the appliance or at customers home e.g.
bottom.
▶ Secure component from falling down.
2021-02-19_8001214500
Remove screws from in following order (1-2-3-4).
2. Remove front panel.

4.2.2 Installing front panel

Install in reverse order.
▶
Copyright by BSH Hausgeräte GmbH Page 63 of 265