Setting Date And Time; Offset Temperature; Selection Of Temperature Display/Humidity - Alpha Ip Rtd 61001-Serie Handbuch

Operating modes and confi guration
wheel (E) and confi rm the selection by shortly pressing the wheel.
3. Confi rm the start time of 00:00 o'clock by shortly pressing the setting wheel (E).
4. Select the desired temperature for the starting time by turning/pressing and confi rm.
5. Select and confi rm the time indicated in the display by turning/pressing the set-
ting wheel.
6. Select the desired temperature for the set period by turning/pressing and confi rm.
7. Repeat the process for the complete period from 00:00 to 23:59 o'clock.
Week profi le 1-3: Heating, 4-6: Cooling
In case of a CO signal the program changes from heating or cooling
automatically according to the following scheme:
1 (heating) to 4 (cooling), 2 (heating) to 5 (cooling), 3 (heating) to 6
(cooling) resp. vice versa.
"OSSF" serves for activating ("On") or deactivating ("OFF") the Smart Start/Stop
function. Once this function is activated, the system calculates in a self-teaching
way when it must start the heating/cooling process in order to provide the stored
temperature exactly at the defi ned heating times.

6.1.6 Setting date and time

1. Press and hold the setting wheel (E) in order to open the confi guration menu.
2. Select the symbol " " and confi rm the selection by shortly pressing the setting
48
wheel.
3. Set the year, month, day and time by turning/pressing the setting wheel (E)
and conform each.

6.1.7 Offset temperature

Since the temperature is measured at the room control unit Display, it may be warm-
er or cooler in another position on the room. This deviation is corrected using the
offset temperature (up to ±3.5 °C).
1. Press and hold the setting wheel (E) in order to open the confi guration menu.
2. Select the symbol " " and confi rm the selection by shortly pressing the set-
ting wheel.
3. Turn the setting wheel and confi rm the desired offset (max. ±3.5 °C) by shortly
pressing the wheel.

6.1.8 Selection of temperature display/humidity

The display alternately shows the actual or the set temperature as well as the hu-
midity, as required.
1. Press and hold the setting wheel (E) in order to open the confi guration menu.
2. Select the symbol " " and confi rm the selection by shortly pressing the setting
wheel.
• "ACT" for displaying the actual temperature (Default value) or
• "SET" for displaying the set temperature or
Operating modes and confi guration
49