Control Panel - Meaco Deluxe 202 Bedienungsanleitung

CONTROL PANEL

---------------------------------------------------------------------------------------------------------------------------------------
When the % symbol is shown, the data on the digital display will refer to the humidity level in
•
the environment.
•
When the °C symbol is shown, the data on the digital display will refer to the temperature in the
environment.
When the H symbol is shown it means the Timer has been set. Press the Timer button to see
•
the number of remaining hours.
• The humidity level in the environment will show for 10 seconds on the display, and then the
temperature of the environment will show for 5 seconds. This will continuously repeat.
POWER BUTTON
When the humidifier is first plugged in to the mains, the machine will beep and turn on in
Standby Mode. Press the Power Button once, the LED display will light up and the machine will start to
work. Press the Power Button again, the machine will stop working and go back into Standby Mode.
AUTO MODE
Press the Auto/Night Button to enter the automatic control mode. In this mode the machine
will maintain a relative humidity level between 50%rh and 60%rh. The machine will choose the best
humidifying method according to the ambient humidity level of the room.
NIGHT MODE
Hold the Auto/Night Button down for 3 seconds to enter Night Mode. The lights on the display
will dim. Press any button to stop Night Mode and the display will brighten.
55