Using The Menu; Menu Functions - Sygonix SY-4548738 Bedienungsanleitung

f) Using the menu
The menu has 6 control buttons:
• "–" button (11) = left
• "+" button (4) = right
• " " button (3) = up
• " " button (10) = down
• "OK" button (5) = confirm selection
• " / " button (2) = cancel/exit menu
g) Menu functions
"Camera"
In this menu you can select up to 4 cameras since the manufacturer also uses the monitor in
surveillance systems. However, the baby monitor only works with one camera. The baby monitor
comes factory registered on the monitor.
"Feed Timer"
Here you can set a time interval for signal output. For example, this time interval can be used
as a baby feed timer. In the right column you can select whether the timer should only run once
(top menu item) or at continuous intervals (middle menu item). Use the lower menu item to
switch off the function.
"Sound"
Here you can select one of the three wireless camera microphone sensitivity levels for noise
alarm (low, medium or high), as described in section 9. k.
At lower sensitivity level, noise alarm is activated only when a baby produces louder noises.
"Music"
This function enables to select one of the six different wireless camera melodies. After confirm-
ing the selection with the "OK" button, the wireless camera plays the selected melody once. Use
the " " button (8) to terminate the playback. The function can also be switched off.
Repeat playing one melody: Select one melody and select "
"OK" button, it will repeat playing the confirmed melody all the time.
Circle playing all melodies: Select one melody and select "
"OK" button, it will play the confirmed melody. After finish playing the confirmed melody, it will
automatically play next melody. After playing all the melodies for one round, it will repeat the
next round playing.
Press "OFF" in the "Music" menu or press "
" in the menu "Music". Press
" button (8) to stop the melody playing.
" in the menu "Music". Press
31