Connection And Operation - Techly IDATA HDMI-4K51 Handbuch

5X1 SWITCH HDMI

CONNECTION AND OPERATION

1. Connect HDMI input source into the switcher.
Please refer to connection diagram.
2. Insert the DC side 5V power supply into the switcher and connect
the AC side of the power supply into the wall outlet (optional).
3. Turn on the power.
Attention: Insert / Extract cable gently.
HDMI SWITCH
DVD
Sources with HDMI interface
Remark: If you need to use a power supply, please note that a power
supply with voltage higher than 5V have not to be used.
SETTING DESCRIPTION
1. Connect DC 5V/1A power supply.
2. Set the HDMI sources at HDMI output, and the HDMI display at
HDMI input mode; Connect input sources first, the connect the
output device, then connect power supply if needed.
3. Switch between 5 inputs manually by 'SELECTION'
4. Switch by remote control. '
next input; '1','2','3': select the input port
DC 5V/1A
STB
' turn off output, '<', '>': previous or
with HDMI
interface
optional
PS2
HDTV
EN
9