Blackmagic Design DaVinci Advanced Panel Keycaps Installationsanleitung Seite 7

Replacing the Soft Keycaps
1
To remove a soft key, gently pull one corner until
the cap is released from its mount.
Replacing the Soft knob caps
1
To remove the soft knob caps, firmly grip the cap
between your forefinger and thumb and pull the
cap away from its spindle mount.
3
Push the cap onto the spindle until the
cap is flush with the base of the spindle.
2
To fit a replacement soft keycap, make sure that
the two small plastic tabs at the back of the cap
are aligned with the slots on the mount. The tabs
are positioned slightly above center. Push the
cap into place until you feel it click.
2
To fit a new soft knob cap, align the D shaped
insert in the cap with the top of the spindle.
DaVinci Advanced Panel Keycaps Upgrade
7