Removing The Keycaps From Your Panel - Blackmagic Design DaVinci Advanced Panel Keycaps Installationsanleitung

Removing the Keycaps from your Panel

The keycaps in your panel are seated on a small plastic mount which the key is pressed into
and held in place.
Keycap
Keycap mount insert
Keycap mount
To remove a keycap
1
Place the ends of the keycap removal tool over
each side of a keycap.
3
Keeping the removal tool at a right angle to the
panel, gently lift up until the keycap is released
from the mount.
The construction of the keycap and the keycap mount
2
Turn the tool slightly to one side so the ends
are underneath the corners of the keycap.
DaVinci Advanced Panel Keycaps Upgrade
5