Cleaning The Spray Arms - Atag VA7114RT Gebrauchsanweisung

NOTE!
Dishwashing results may be affected if the coarse and fine filters are incorrectly fitted. The
dishwasher must not be used without the filters in place!

Cleaning the spray arms

Holes and bearings can sometimes become blocked. Remove any debris using a pin or the like.
The spray arms also have holes underneath.
To facilitate cleaning you can remove the spray arms. Remember to fit them firmly back into place
afterwards.
Top spray arm
The upper basket must be removed before the top spray arm can be released. Pull out the upper
basket and turn the basket catch on each runner outwards (see illustration). The basket can now
be removed.
Check that the coloured stop
on the right in the bottom
drain is in place.
Care and cleaning
27