Basic Settings - Atag VA7114RT Gebrauchsanweisung

2. Basic settings

Open the door and press the main power switch.
"This is a first time set up." is shown on the display. It is important that you choose the right settings
to ensure good dishwashing results.
Main power switch
Settings
1. Language
Select the language to be shown on the display.
2. Rinse aid 0/1/2/3/4/5/TAB
Drying is faster and a better result is achieved if you use rinse aid. You will also achieve a better
dishwashing result with clear and spotless dishes.
Select rinse aid dosage. The rinse aid dispenser can be adjusted between 0 (Off) and 5 (High
dosage).
When using an all-in-one detergent that contains rinse aid, you can activate the setting TAB. Read
more about all-in-one detergent in the chapter Using the dishwasher.
Pre-selected at factory: 5
Top up rinse aid
Press to open
1. Open the rinse aid compartment lid.
2. Carefully top up with rinse aid to the level marked max.
3. Wipe up any splashes of rinse aid around the compartment.
4. Close the lid firmly.
Before washing for the first time
Select setting
Confirm setting
7