Safety Instructions; Proper Use; Care - Dekolight 180136 Produkt-Hinweise Bedienungsanleitung

Product-Notes
Manual
Article No.: 180136
Dear customer,
thank you for deciding to purchase our product. The product fulfils the requirements of effective European and
national guidelines.
To maintain the condition of the product and to ensure safe operation, you - as the user - must observe the
product notes and the operation manual! They contain important information for the start-up and handling. It is
important, therefore, that these documents are archived carefully for referring to information at a later stage.
aufbewahren.

1. Safety Instructions

We are not responsible for any property damage or personal injury caused by failure to observe these
productnotes and manual, improper handling or unauthorised modifications.
It can only be installed by a qualified electrician.
Make sure that the item has not been damaged during transport before putting the light into operation. It
maynot be operated if there are any damages to electrical parts.
It may only be operated once removed from the packaging.
The type plate must not be removed.
Do not allow the product to come into contact with extreme heat or naked flames.
Use the supplied fastening material only when it is suited for the installation background.
The product must not be covered with objects (decorations) or thermally insulating coverings /similar materials.
Before disposal of the packaging material make sure that all components are removed.
Keep packaging material away from the reach of children and pets. The packaging contains small parts
thatmay be swallowed by children.

2. Proper Use

This product is only intended for lighting purposes and may only be operated on normal or non-flammable
surfaces.
Use the product only in protected and dry interior rooms.

3. Care

Disconnect the entire product from the mains first and allow it to cool down before cleaning or maintaining.
Use a dry or slightly moistened cloth for cleaning.
Never use any chemicals, flammable cleaning agents or abrasives. These may cause damage to the surface
coating and/or the insulators.
Deko-Light Elektronik-Vertriebs GmbH 30.07.2019
www.deko-light.com / deko@deko-light.com
Technical Data can be changed without advance notice. Errors excepted. 1 / 5