Produkt-Hinweise Bedienungsanleitung Artikel Nr.: 180136 Sehr geehrter Kunde, vielen Dank das Sie sich für den Kauf unseres Produktes entschieden haben. Es erfüllt die Anforderungen der geltenden europäischen und nationalen Richtlinien. Um den Zustand des Produktes zu erhalten und einen gefahrlosen Betrieb sicherzustellen, müssen Sie als Anwender diese Produkt-Hinweise und Montageanleitung beachten! Sie enthalten wichtige Informationen zur Inbetriebnahme und Handhabung.
Produkt-Hinweise Bedienungsanleitung Artikel Nr.: 180136 4. Funktionsstörung Sind die zu steuernden Leuchtmittel betriebsbereit/korrekt angeschlossen und mit Strom versorgt? Kontrolle der angeschlossenen Leitungen. Fernbedienung trennen und neu verbinden. 5. Lagerung und Entsorgung Elektronik-Altgeräte müssen den öffentlichen Sammelstellen zugeführt werden und dürfen nicht als Hausmüll entsorgt werden.
Produkt-Hinweise Bedienungsanleitung Artikel Nr.: 180136 Installation 1. Fernbedienung mit LED Bulb „verbinden“ a. LED Bulb einschalten und innerhalb 1 Sekunde die Taste „Einschalten“ gedrückt halten, anschließend blinkt die Bulb 3 mal weiß auf, dass ist das Zeichen dafür dass die Bulb mit dem Touch Controller verbunden ist.
Seite 6
Product-Notes Manual Article No.: 180136 Bulb, RF Color & White Remote Deko-Light Elektronik-Vertriebs GmbH 30.07.2019 www.deko-light.com / deko@deko-light.com Technical Data can be changed without advance notice. Errors excepted. 1 / 5...
Seite 7
Product-Notes Manual Article No.: 180136 Contents Safety Instructions ..........................page 3 Proper Use .............................. page 3 Care ................................ page 3 Faulty Function ............................page 4 Storage and Disposal ..........................page 4 Purchased parts package ........................page 4 Technical data ............................page 4 Installation ...............................
Product-Notes Manual Article No.: 180136 Dear customer, thank you for deciding to purchase our product. The product fulfils the requirements of effective European and national guidelines. To maintain the condition of the product and to ensure safe operation, you - as the user - must observe the product notes and the operation manual! They contain important information for the start-up and handling.
Product-Notes Manual Article No.: 180136 4. Faulty Function Are the luminaires to be controlled ready / correctly connected and supplied with power? Control of the connected lines. Disconnect and reconnect wall remote. 5. Storage and Disposal Used electronic devices must be brought back to public collection points and must not be disposed of as household waste.
Product-Notes Manual Article No.: 180136 8. Installation 1. Connect Touch-Controller with bulb a. Switch on the LED Bulb and then push and hold the „ON“ button within 1 sec.on the Touch-Controller, after that the bulb flashes up 3 times, then the Touch-Controller and the bulb are connected.