Installation; Programs - Dekolight 180136 Produkt-Hinweise Bedienungsanleitung

Product-Notes
Manual
Article No.: 180136

8. Installation

1. Connect Touch-Controller with bulb
a. Switch on the LED Bulb and then push and hold the „ON" button within 1 sec.on the Touch-Controller,
after that the bulb flashes up 3 times, then the Touch-Controller and the bulb are connected.
b. If this step isn't working please try again.
2. Disconnect Touch-Controller from bulb
a. Switch on the LED bulb and then push and hold the „ON" button within 1 sec. again still the bulb
flashes up 9 times, then the Touch-Controller and the bulb are disconnected.
b. Now you can address the bulb again with the same or another Touch-Controller.

9. Programs

1. Static white
2. Static Red
3. Static Green
4. Static Blue
5. Fade in Fade out
6. Ramp up
7. Ramp down
8. RGB Color Flash
9. Shop Window
10. Color Change
11. Disco
12. Fire
The product is CE compliant and meets all the essential requirements of Directive 2014/53/EU RED.
The CE Declaration of Conformity for this product can be obtained at the following address.
Deko-Light Elektronik-Vertriebs GmbH
www.deko-light.com / deko@deko-light.com
Technical Data can be changed without advance notice. Errors excepted.
https://shop.deko-light.com/
30.07.2019
1 / 5