Werbung
Verfügbare Sprachen
Verfügbare Sprachen
◆ Introduction:
Thank you for choosing our access control series product. The AIO (all in one) machine is touch-screen access
control and support opening the door by password, swiping card. It has functions of external Wiegand read head,
external memory, anti-tamper alarm, adding and deleting card and extending voisce.
1.Technical Data
No
1
2
3
4
5
6
7
8
2.Function setting
Press"*", enter "123456" or
swipe master card directly to
get into the programming
mode
◆Set and use
1. The initial open code 7890, the programming code 123456
2. Shortcut set
Press *
wait for credit card
(1) Swipe system master card, enter system programming state
(2) swipe added card to get to adding user card state
(3) swipe deleted card to get to deleting user card state
3. Modify the programming code, and set the system master card
A, press *
programming code
Note: The buzzer sounds for the operation is successful (password length is 1-8).
B, according to the programming code * program code #
Note: credit card Beeper represents the main card set successfully.
4 Add-in card-type user
Press * programming code # 1 "4 digits user code" # swipe card
Note: The user code to any four digits and automatically incremented. Continues to add card, the code will
automatically gain 1.
5. Add password type user
Press * programming code
Note: 4 digits user number code (for example, 1 to enter 0001) User password (0-8 digits)
the buzzer sounds loudly means that add a password type user operation is successful, continue to enter the
user code can continuously add a password-type users who uses this password.
6. Add card + password type user
Press *
programming code
The buzzer sounds loudly means that add a card + password type user operation is successful, continue to enter
the user code to add te user who use this password.
Add card password type users. (how to open the door: swipe card, after the green light flashes, enter the user
password and "#" to open the door)
7. Delete a single user
Press *
programming code
8. Delete all users
Press
*
Enter the programming code #
specification
Operating voltage
Quiescent Current
Storage capacity
Read Range
Ambient temperature
Humidity
Opening hours
Dimensions
"0"
modify the programming code, and set the main card.
Adding a user card
"1"
"2"
Add the password for the user
"3"
Add Calgary Password
"4"
Delete single user
"5"
Delete all users
"6"
change password
"7"
Modify open delay time
"8"
system initialization
"9"
Set universal password to open the door, to increase card and delete card
# 0 new password # new password #
# 2 4 digits user code user password #
# 3
4 digits user code 4 digits password # swipe card
# 4
enter his user code /swipe his card / enter his 10 digits card number #
5
enter the program code or swipe master card
0
swipe card
1
parameter
12V
≤50mA
3000 or 5000 card users
5-10cm
-20 ℃ -70 ℃
0-95%
0-255 seconds (adjustable)
110.5*70*21mm
#
Werbung
