Backlight; Language; Factory Reset; Software Version - Kenwood CR-ST80DAB Bedienungsanleitung

9.5 Backlight

The display illumination can be programmed in 3 brightness levels. The following settings can be
made in the "Backlight" menu:
"Timeout": Time until the display is set to the "Dim Level" lighting level.
Choices: "On / 10 / 20 / 30 / 45 / 60 / 90 / 120 / 180 seconds"
"ON" means that the radio always remains in the brightness level of the "On Level".
"On Level": Brightness of the display when the radio is switched on.
Choices: "High" / "Medium" / "Low"
"Dim Level": Brightness adjustment for operation and standby.
Choices: "Medium" / "Low"
The selected options are marked with "ü". With <DIMMER> on the remote control, the lighting can
be set in 3 levels.

9.6 Language

In the "Language" menu you can set the menu language of the radio. To select a language, please
use the <UP> or <DOWN> buttons and confirm this by pressing the <OK> button. Alternatively, the
selection can also be made with the <NAVIGATE> knob.
The following languages are available:
Danish, German, English, Finnish, French, Italian, Dutch, Norwegian, Polish, Portuguese, Swedish,
Spanish, Turkish

9.7 Factory Reset

To reset the radio to the delivery state, please select "YES" in the menu "Factory Reset". If you
select "NO" the process is cancelled.

9.8 Software version

Here you can call up the version number of the current firmware.
16