Hydraulic Connections - Arbonia DCB Serie Installations- Und Wartungsanleitung

English
"DCB-W" AIR CURTAIN UNIT
The "DCB-W" air curtain units have an electronic con-
trol set to carry out different functions and adjustment
modes, in order to meet the installation requirements.
The control is adjusted
(code ZE0161 0001).
- HYDRAULIC
CONNECTIONS
MAXIMUM WORKING PRESSURE: 1000 kPa.
ALWAYS USE TWO SPANNERS
TO CONNECT THE HEAT EXCHANGER
TO THE PIPES.
ALWAYS FIT A GATE VALVE
IN THE WATER CIRCUIT.
The installation operation must be performed exclusively
by authorised and qualified personnel.
USE ON/OFF ACTUATOR 230VAC 50HZ.
U
OUT
40
T-MB
by a control
IN
E
READ THESE INSTRUCTIONS
FULLY BEFORE USING THE CONTROL.
AS TO THE CONNECTION DIAGRAM,
REFER TO THE SPECIFIC SECTION INCLU-
DED IN THE PRESENT MANUAL.
U
OUT
DCB-W
CARE-
IN
E